Annonce

N'hésitez pas à consulter notre FAQ avant d'ouvrir un sujet ici. Ces forums ne remplacent pas le support par ticket e-Clients.

#1 13-03-2018 09:54:29

zhangxiaosan
Client assidu
Date d'inscription: 29-01-2016
Messages: 5997

Smelting and charging of electric furnace

Requirements for loading: to shorten the time, to ensure the yield of the alloy elements, to reduce the power consumption and to increase the lining of the furnace
Before loading, the batching workers should be carefully proportioning according to the requirements of the planned furnace number and steel type. According to the requirements of different steel technology, the burden should be carefully analyzed and calculated and the ingredients are accurately proportioning. Therefore, it is necessary to confirm the composition and alloy composition of the iron and steel material needed before loading, and check the measuring instruments, so as to ensure the proper chemical composition and accurate weight after melting, so as to facilitate the smooth operation of smelting.lab used vacuum furnace made in China
In order to achieve the density, it is necessary to rely on the reasonable collocation of large, medium and small furnace materials. The furnace material is dense, can be obtained once, and can improve the conduction and heat transfer performance of the furnace material. When the electrode is well, the arc is stable and is beneficial to melting. Usually, the charge is less than 10kg is called small material, 10~25kg material is more than 50kg, called aniseed. When loading, the furnace material of different capacity electric furnace has different size requirements, but the maximum of the furnace material must not exceed the 1/50 of the total burden of the furnace.
China Wholesale Top Quality Cheap Scr Induction Melting Electric Furnace
The cloth is more important, generally is part of small material miscellaneous iron installed in the basket bottom, above the small material, the center part of the charging basket loaded aniseed or refractory material, intermediate small fill material, so smooth and non porous, so that is conducive to conductive, and electrode broken bridge and eliminate material to prevent the collapse of material. The rest of the small and medium-sized material installed in refractory material or aniseed on and around. At the end of the material, the heavy load of 0.02%~0.03% was loaded on the upper part of the basket to help the arc, stabilize the current and reduce the radiation damage to the cover of the furnace.IPG Watches Vacuum Coating Machine

Hors ligne

 

#2 08-06-2018 09:41:10

valenmyr
Client assidu
Date d'inscription: 08-05-2018
Messages: 26863

Re: Smelting and charging of electric furnace

jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886
jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886
jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886
jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886
jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886
jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886
jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886
jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886
jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886
jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886
jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886jt16886
jt16886jt16886

En ligne

 

Pied de page des forums

Propulsé par PunBB
© Copyright 2002–2005 Rickard Andersson
Traduction par punbb.fr